Top Feed Injectors
Top feed gasoline injectors are tested, cleaned, retested, and returned with documented flow and spray pattern results.
NW Fuel Services
Gasoline Injector Testing and Cleaning
Gasoline injector testing, ultrasonic cleaning, and flow testing for top feed, side feed, and GDI injectors with before and after reports.
Quote Request Sent
Thank you. Our team will review your service request, then respond by email or call you.
Why This Service
- ASNU Classic GDI ultrasonic cleaning machine
- Top feed, side feed, and GDI injector coverage
- Flow rate, spray pattern, and operation testing before cleaning
- Post cleaning testing to document improvement
Overview
Service Overview
NW Fuel Injection Services has provided gasoline injector testing and cleaning for more than 20 years. Our Surrey shop uses the ASNU Classic GDI cleaning machine to test flow rate, spray pattern, and general injector operation before ultrasonic cleaning, then repeats the same tests after cleaning to document improvement.
Gasoline Injector Service
ASNU Classic GDI Testing And Cleaning
Although much of our work is diesel focused, gasoline injector testing and cleaning has been part of NW Fuel for more than two decades. The ASNU Classic GDI machine uses ultrasonic cleaning technology to test and clean gasoline fuel injectors from top feed to side feed and gasoline direct injection designs.
- Top feed gasoline injector testing and cleaning
- Side feed gasoline injector testing and cleaning
- Gasoline direct injection injector service
- Flow rate and spray pattern testing
- Modern ASNU ultrasonic cleaning technology
Before Cleaning
Pre Test Baseline Results
Before injectors are placed in the ultrasonic cleaning bath, we run a pre test to measure flow rate, spray pattern, and general operation. This establishes a baseline so the injector can be compared after cleaning, rather than relying on guesswork.
- Flow rate measured before cleaning
- Spray pattern inspected before cleaning
- General injector operation checked before service
- Baseline results recorded for comparison
- Problem injectors identified before additional work
After Cleaning
Ultrasonic Cleaning And Final Report
Because gasoline injectors do not come apart for internal service, ultrasonic cleaning is used to reach internal areas that cannot be cleaned by hand. We pulse the injectors during cleaning to help flush internal components, then repeat the same tests after cleaning. Your injectors are returned with a written report, before and after results, and the necessary gaskets and seals for reinstallation.
- Injectors pulsed during ultrasonic cleaning
- Internal deposits cleaned and flushed
- Post cleaning flow and spray pattern verification
- Written before and after results supplied
- Gaskets and seals included for reinstallation
Service Fit
Injectors We Service
Side Feed Injectors
Side feed injectors require careful handling and testing to confirm cleaning improves flow balance and spray quality.
GDI Injectors
Gasoline direct injection injectors operate under demanding conditions and benefit from dedicated ASNU Classic GDI cleaning capability.
No Fix No Pay
If cleaning cannot solve the injector problem due to a shorted coil or physical damage, you do not pay for the cleaning service.
Benefits
Why Choose This Service
- ASNU Classic GDI ultrasonic cleaning machine
- Top feed, side feed, and GDI injector coverage
- Flow rate, spray pattern, and operation testing before cleaning
- Post cleaning testing to document improvement
- Written before and after test reports
- No fix, no pay policy when cleaning cannot solve the problem
Pricing
Service Pricing
| Style | Price | Turnaround |
|---|---|---|
| Top Feed Injector Testing And Cleaning | $39 | 48 hrs |
| Side Feed Injector Testing And Cleaning | $49 | 48 hrs |
| GDI Injector Testing And Cleaning | $59 | 48 hrs |
| Additional Gaskets Or Seals | $5 to $10 | As needed |
Process
Our Service Process
Pre Test
Flow rate, spray pattern, and general operation are measured before cleaning to establish a baseline.
Ultrasonic Cleaning
The ASNU Classic GDI machine uses ultrasonic cleaning while pulsing the injectors to clean and flush internal components.
Post Test
The same tests are repeated after cleaning to measure changes in flow, spray pattern, and injector operation.
Report And Return
Injectors are returned with a written before and after report plus the required gaskets and seals for installation.
FAQ
Service Questions
We test and clean top feed, side feed, and gasoline direct injection injectors using the ASNU Classic GDI cleaning machine.
Service includes pre testing, ultrasonic cleaning, post testing, a written before and after report, and the necessary gaskets and seals for reinstallation.
We operate a no fix, no pay policy. If ultrasonic cleaning cannot resolve the injector issue because of a shorted coil, physical damage, or another non cleanable failure, you do not pay for the cleaning service.
Top feed injectors are $39, side feed injectors are $49, and GDI injectors are $59. Additional gaskets or seals may cost $5 to $10 if needed.
Use good quality gasoline, keep up with regular vehicle maintenance, and follow the manufacturer's service recommendations, especially on modern gasoline direct injection systems.
Injector Testing and Rebuilding
Diesel and gasoline injector testing prices for mechanical, common rail, HEUI, EUI, Cummins STC, pumpeduse, top feed, side feed, and GDI injectors.
Learn More
Component Parts Distribution
OEM and remanufactured diesel parts with expert phone support, same-day CORE credits, and technical catalogs.
Learn More